The remote may need to be reset

 

If you have the amino NOVA remote (pictured below) please go through the following steps to reset the remote. If you have a different model remote, please contact Technical Support for assistance. 


Resetting Brand Search or Auto Search 

  1. Press and hold the Setup button for approximately three seconds until the device control button flashes twice. 
  2. Press the number buttons 9 7 7 
  3. Press and hold the Setup button for approximately three seconds until the device control button flashes twice. 
  4. If you make an error, the LED will give a single long flash. 


Resetting ‘punch through’ 

  1. Press and hold the Setup button for approximately three seconds until the device control button flashes twice. 
  2. Press the number buttons 9 7 8
  3. Press and hold the Setup button for approximately three seconds until the device control button flashes twice. 
  4. If you make an error, the LED will give a single long flash.

Once you have successfully reset the remote, press STB and then adjust the volume to your liking. If you need assistance with re-programming the remote to pair with your television again, the programming guides for the remotes we provide can be found here: Having issues with your Lightband remote?




Question not listed here?

Back to Cable FAQ

Contact CDE Technical Support at 931-648-8151